QMqttClient Class

Member Function Documentation

[explicit] QMqttClient::QMqttClient(QObject *parent = nullptr)

Creates a new MQTT client instance with the specified parent.

[override virtual noexcept] QMqttClient::~QMqttClient()

Deletes a MQTT client. If the MQTT client was not already disconnected from the MQTT broker, it will be disconnected from automatically.

void QMqttClient::authenticate(const QMqttAuthenticationProperties &prop)

Sends an authentication request to the broker. prop specifies the required information to fulfill the authentication request.

This function should only be called after a QMqttClient::authenticationRequested signal has been emitted.

See also authenticationRequested() and authenticationFinished().

[signal] void QMqttClient::authenticationFinished(const QMqttAuthenticationProperties &p)

This signal is emitted after extended authentication has finished. p specifies available details on the authentication process.

After successful authentication QMqttClient::connected is emitted.

See also authenticationRequested() and authenticate().

[signal] void QMqttClient::authenticationRequested(const QMqttAuthenticationProperties &p)

This signal is emitted after a client invoked QMqttClient::connectToHost or QMqttClient::connectToHostEncrypted and before the connection is established. In extended authentication, a broker might request additional details which need to be provided by invoking QMqttClient::authenticate. p specifies properties provided by the broker.

See also authenticationFinished() and authenticate().

[signal] void QMqttClient::brokerSessionRestored()

This signal is emitted after a client has successfully connected to a broker with the cleanSession property set to false, and the broker has restored the session.

Sessions can be restored if a client has connected previously using the same clientId.

[invokable] void QMqttClient::connectToHost()

Initiates a connection to the MQTT broker.

void QMqttClient::connectToHostEncrypted(const QSslConfiguration &conf)

Initiates an encrypted connection to the MQTT broker.

conf specifies the SSL configuration to be used for the connection

[signal] void QMqttClient::connected()

This signal is emitted when a connection has been established.

QMqttConnectionProperties QMqttClient::connectionProperties() const

Returns the connection properties the client requests to the broker.

See also setConnectionProperties().

[invokable] void QMqttClient::disconnectFromHost()

Disconnects from the MQTT broker.

[signal] void QMqttClient::disconnected()

This signal is emitted when a connection has been closed. A connection may be closed when disconnectFromHost() is called or when the broker disconnects.

QMqttLastWillProperties QMqttClient::lastWillProperties() const

Returns the last will properties.

See also setLastWillProperties().

[signal] void QMqttClient::messageReceived(const QByteArray &message, const QMqttTopicName &topic = QMqttTopicName())

This signal is emitted when a new message has been received. The category of the message is specified by topic with the content being message.

[signal] void QMqttClient::messageSent(qint32 id)

Indicates that a message that was sent via the publish() function has been received by the broker. The id is the same as returned by publish() to help tracking the status of the message.

[signal] void QMqttClient::messageStatusChanged(qint32 id, QMqtt::MessageStatus s, const QMqttMessageStatusProperties &properties)

This signal is emitted when the status for the message identified by id changes. s specifies the new status of the message, and properties specify additional properties provided by the server.

[signal] void QMqttClient::pingResponseReceived()

This signal is emitted after the broker responds to a requestPing() call or a keepAlive() ping message, and the connection is still valid.

[invokable] qint32 QMqttClient::publish(const QMqttTopicName &topic, const QByteArray &message = QByteArray(), quint8 qos = 0, bool retain = false)

Publishes a message to the broker with the specified topic. qos specifies the QoS level required for transferring the message.

If retain is set to true, the message will stay on the broker for other clients to connect and receive the message.

Returns an ID that is used internally to identify the message.

[invokable] qint32 QMqttClient::publish(const QMqttTopicName &topic, const QMqttPublishProperties &properties, const QByteArray &message = QByteArray(), quint8 qos = 0, bool retain = false)

Publishes a message to the broker with the specified properties and topic. qos specifies the QoS level required for transferring the message.

If retain is set to true, the message will stay on the broker for other clients to connect and receive the message.

Returns an ID that is used internally to identify the message.

bool QMqttClient::requestPing()

Sends a ping message to the broker and expects a reply.

If the connection is active and autoKeepAlive is true, then calling this function will fail as the client is responsible for managing this process.

Using requestPing() manually requires a call every time within the keepAlive interval as long as the connection is active.

To check whether the ping is successful, connect to the pingResponseReceived() signal.

Returns true if the ping request could be sent.

See also pingResponseReceived(), autoKeepAlive(), and keepAlive().

QMqttServerConnectionProperties QMqttClient::serverConnectionProperties() const

Returns the QMqttServerConnectionProperties the broker returned after a connection attempt.

This can be used to verify that client side connection properties set by QMqttClient::setConnectionProperties have been accepted by the broker. Also, in case of a failed connection attempt, it can be used for connection diagnostics.

See also connectionProperties().

void QMqttClient::setConnectionProperties(const QMqttConnectionProperties &prop)

Sets the connection properties to prop. QMqttConnectionProperties can be used to ask the server to use a specific feature set. After a connection request the server response can be obtained by calling QMqttClient::serverConnectionProperties.

See also connectionProperties().

void QMqttClient::setLastWillProperties(const QMqttLastWillProperties &prop)

Sets the last will properties to prop. QMqttLastWillProperties allows to set additional features for the last will message stored at the broker.

See also lastWillProperties().

void QMqttClient::setTransport(QIODevice *device, QMqttClient::TransportType transport)

Sets the transport to device. A transport can be either a socket type or derived from QIODevice and is specified by transport.

See also transport().

QMqttSubscription *QMqttClient::subscribe(const QMqttTopicFilter &topic, quint8 qos = 0)

Adds a new subscription to receive notifications on topic. The parameter qos specifies the level at which security messages are received. For more information about the available QoS levels, see Quality of Service.

This function returns a pointer to a QMqttSubscription. If the same topic is subscribed twice, the return value points to the same subscription instance. The MQTT client is the owner of the subscription.

QMqttSubscription *QMqttClient::subscribe(const QMqttTopicFilter &topic, const QMqttSubscriptionProperties &properties, quint8 qos = 0)

Adds a new subscription to receive notifications on topic. The parameter properties specifies additional subscription properties to be validated by the broker. The parameter qos specifies the level at which security messages are received. For more information about the available QoS levels, see Quality of Service.

This function returns a pointer to a QMqttSubscription. If the same topic is subscribed twice, the return value points to the same subscription instance. The MQTT client is the owner of the subscription.

QIODevice *QMqttClient::transport() const

Returns the transport used for communication with the broker.

See also setTransport().

void QMqttClient::unsubscribe(const QMqttTopicFilter &topic)

Unsubscribes from topic. No notifications will be sent to any of the subscriptions made by calling subscribe().

void QMqttClient::unsubscribe(const QMqttTopicFilter &topic, const QMqttUnsubscriptionProperties &properties)

Unsubscribes from topic. No notifications will be sent to any of the subscriptions made by calling subscribe(). properties specifies additional user properties to be passed to the broker.