default search action
Computer-Aided Design, Volume 26
Volume 26, Number 1, January 1994
- Les A. Piegl:
Editorial. 3-5 - Tony C. Woo:
Visibility maps and spherical algorithms. 6-16 - Les A. Piegl, Wayne Tiller:
Software-engineering approach to degree elevation of B-spline curves. 17-28 - Waguih H. ElMaraghy, Sree Ram Valluri, Bianka M. Skubnik, Patrick D. Surry:
Intersection volumes and surface areas of cylinders for geometrical modelling and tolerancing. 29-45 - Moshe Shpitalni, Anath Fischer:
Separation of disconnected machining regions on the basis of a CSG model. 46-58 - C. L. Philip Chen
, Steven R. LeClair:
Integration of design and manufacturing: solving setup generation and feature sequencing using an unsupervised-learning approach. 59-75 - 3rd European conference on rapid prototype & manufacturing 6th-7th July 1994. 78
Volume 26, Number 2, February 1994
- Kenneth Preiss:
Agile manufacturing. 83-84 - Rajneet Sodhi, Joshua U. Turner:
Towards modelling of assemblies for product design. 85-97 - Paula L. Beaty, Patrick A. Fitzhorn, Gary J. Herron:
Extensions in variational geometry that generate and modify object edges composed of rational Bézier curves. 98-108 - Kamal P. Shah, S. A. Meguid, Athanasios Zougas:
Development of software for integrated dynamic analysis of multibody systems. 109-118 - André Dolenc, Ismo Mäkelä:
Slicing procedures for layered manufacturing techniques. 119-126 - George Samaras, David L. Spooner, Martin Hardwick:
Query classification in object-oriented engineering design systems. 127-136 - Guido Brunnett, Johannes Kiefer:
Interpolation with minimal-energy splines. 137-144 - Fenqiang Lin, William T. Hewitt:
Expressing Coons-Gordon surfaces as NURBS. 145-155 - CSG 94: Set-theoretic solid modelling: Techniques and applications, Winchester, UK, April 1994. 156
- Hans Hagen:
Advanced animation and rendering techniques : A Watt Addison-Wesley, UK (1992) 840 pp, ISBN 0 201 544 121. 157 - L. W. W. Laing:
An introduction to 3D autoCAD : A Yarwood Longman, UK (1993), 180 pp, ISBN 0 582 20991 9. 157-158
Volume 26, Number 3, March 1994
- B. K. Choi:
Special issue: NC machining and cutter-path generation. 163 - Susan X. Li, Robert B. Jerard:
5-axis machining of sculptured surfaces with a flat-end cutter. 165-178 - B. H. Kim, C. N. Chu:
Effect of cutter mark on surface roughness and scallop height in sculptured surface machining. 179-188 - Martin Held, Gábor Lukács, László Andor:
Pocket machining based on contour-parallel tool paths generated by means of proximity maps. 189-203 - S. Marshall, John G. Griffiths:
A new cutter-path topology for milling machines. 204-214 - Jordan J. Cox, Yasuko Takezaki, Helaman R. P. Ferguson, Kent E. Kohkonen, Eric L. Mulkay:
Space-filling curves in tool-path applications. 215-224 - Daniel C. H. Yang, Tom Kong:
Parametric interpolator versus linear interpolator for precision CNC machining. 225-234 - B. K. Choi, Y. C. Chung, J. W. Park, D. H. Kim:
Unified CAM-system architecture for die and mould manufacturing. 235-243 - Motoo Kondo:
Decomposition of complex geometry for a manufacturing application. 244-252
Volume 26, Number 4, April 1994
- Deba Dutta:
Special issue: Mathematical methods for CAD. 258 - Qijin Liu, T. C. Sun:
G1 interpolation of mesh curves. 259-267 - Klaus-Peter Beier, Yifan Chen:
Highlight-line algorithm for realtime surface-quality assessment. 268-277 - Masaki Aono, David E. Breen, Michael J. Wozny:
Fitting a woven-cloth model to a curved surface: mapping algorithms. 278-292 - Irene Gargantini, Günther F. Schrack, Aron Kwok:
Reconstructing multishell solids from voxel-based contours. 293-301 - Mehran Chirehdast, Panos Y. Papalambros
Conversion of spatial-enumeration scheme into constructive solid geometry. 302-314 - Denis Blackmore, Ming C. Leu, Frank Yeong-Chyang Shih:
Analysis and modelling of deformed swept volumes. 315-326 - Y. L. Srinivas, Debasish Dutta:
Intuitive procedure for constructing geometrically complex objects using cyclides. 327-335
Volume 26, Number 5, May 1994
- Charles M. Eastman:
Out of STEP? 338-340 - Janos Vida
A survey of blending methods that use parametric surfaces. 341-365 - Rajneet Sodhi, Joshua U. Turner:
Relative positioning of variational part models for design analysis. 366-378 - Edwin Boender, Willem F. Bronsvoort, Frits H. Post:
Finite-element mesh generation from constructive-solid-geometry models. 379-392 - Barry Joe, Wenping Wang, Fuhua Cheng:
Reduced-knot NURBS representations of rational G1 composite Bézier curves. 393-399 - M. G. Leesley:
CAD/CAM: Features, application and management : P J Jones Macmillan, UK (1992), 340 pp, ISBN 0 333 48532 7. 400
Volume 26, Number 6, June 1994
- Joshua U. Turner, Jarek Rossignac:
Special Issue: Solid Modeling '93. 402 - Mohand Ourabah Benouamer, Dominique Michelucci, Bernard Peroche:
Error-free boundary evaluation based on a lazy rational arithmetic: a detailed implementation. 403-416 - Marco Mazzetti, Luigi Ciminiera:
Computing CSG-tree boundaries as algebraic expressions. 417-425 - Yacov Hel-Or, Ari Rappoport, Michael Werman:
Relaxed parametric design with probabilistic constraints. 426-434 - Jin-Kang Gui, Martti Mäntylä:
Functional understanding of assembly modelling. 435-451 - William J. Bouma, George Vanek Jr.:
Modelling contacts in a physically based simulation. 452-464 - Louis Rivest, Clement Fortin, Claude Morel:
Tolerancing a solid model with a kinematic formulation. 465-476 - Douglas L. Waco, Yong Se Kim
Geometric reasoning for machining features using convex decomposition. 477-489 - Gershon Elber, Elaine Cohen:
Toolpath generation for freeform surface models. 490-496
Volume 26, Number 7, July 1994
- Graham E. M. Jared, Ken G. Swift:
Special section: Tools for product introduction. 498 - Leonard D. Albano, Nam P. Suh:
Axiomatic design and concurrent engineering. 499-504 - Geoffrey Boothroyd:
Product design for manufacture and assembly. 505-520 - Frank G. Mill, Jane C. Naish, Jonathan C. Salmon:
Design for machining with a simultaneous-engineering workstation. 521-527 - Graham E. M. Jared, Mark G. Limage, Ian J. Sherrin, Ken G. Swift:
Geometric reasoning and design for manufacture. 528-536 - Shuo-Yan Chou, Tony C. Woo, Lin-Lin Chen, Kai Tang
Scallop hull and its offset. 537-542 - Ian Stroud:
Boundary modelling with special representations. 543-550 - Charles M. Eastman, Nirva Fereshetian:
Information models for use in product design: a comparison. 551-572 - Cecil G. Armstrong
Modelling requirements for finite-element analysis. 573-578 - Helmut Ratschek, Jon G. Rokne:
Box-sphere intersection tests. 579-584 - Ching-Kuang Shene:
Test for intersection between a plane and a connected compact polyhedron. 585-588
Volume 26, Number 8, August 1994
- Bianca Falcidieno:
Special issue: Modelling in computer graphics. 595 - Shigeru Kuriyama:
Surface modelling with an irregular network of curves via sweeping and blending. 597-606 - Francis Lazarus, Sabine Coquillart, Pierre Jancène:
Axial deformations: an intuitive deformation technique. 607-613 - Lluis Solano, Pere Brunet:
Constructive constraint-based model for parametric CAD systems. 614-621 - Shigeo Takahashi
Manifold-based multiple-viewpoint CAD: a case study of mountain guide-map generation. 622-631 - Xin Chen, Francis Schmitt:
Surface modelling of range data by constrained triangulation. 632-645 - Teresa De Martino, Bianca Falcidieno, Franca Giannini, Stefan Haßinger, Jivka Ovtcharova:
Feature-based modelling by integrating design and recognition approaches. 646-653
Volume 26, Number 9, September 1994
- James H. Oliver
Automated path planning for integrated assembly design. 658-666 - Yuan-Jye Tseng, Sanjay B. Joshi
Recognizing multiple interpretations of interacting machining features. 667-688 - Avner Schwarz, Daniel M. Berry, Edna Shaviv:
Representing and solving the automated building design problem. 689-698 - Qing-Wen Yan, C. L. Philip Chen
Efficient algorithm for the reconstruction of 3D objects from orthographic projections. 699-717 - Joris S. M. Vergeest:
STEP: An introduction : J. Owen Information Geometers, UK (1993), 145 pp, ISBN 1 87472804 6. 719-720
Volume 26, Number 10, October 1994
- John Zucker, Adrian Demaid:
Object-oriented representation of qualitative engineering properties. 722-734 - Suresh K. Lodha, Joe D. Warren:
Degree reduction of Bézier simplexes. 735-746 - Avner Schwarz, Daniel M. Berry, Edna Shaviv:
On the use of the automated building design system. 747-762 - Jonathan Cagan
Shape annealing solution to the constrained geometric knapsack problem. 763-770 - David H. Lentz, Robert Sowerby:
Hole extraction for sheet metal components. 771-783 - Alan Ball:
Fundamental developments of computer-aided geometric modeling: L. Piegl (Ed.) Academic Press, USA (1993), 414 pp, ISBN 0 12 554765 X. 784
Volume 26, Number 11, November 1994
- B. K. Choi:
Special issue: NC machining and cutter-path generation. 786 - Hui Li, Zuomin Dong
Optimal toolpath pattern identification for single island, sculptured part rough machining using fuzzy pattern analysis. 787-795 - Gershon Elber:
Accessibility in 5-axis milling environment. 796-802 - Malcolm C. Fields, David C. Anderson:
Fast feature extraction for machining applications. 803-813 - Heedong Ko, Moon-Sang Kim, Hyun-Goo Park, Seung-Woo Kim
Face sculpturing robot with recognition capability. 814-821 - Kunwoo Lee, Tae Ju Kim, Sung Eui Hong:
Generation of toolpath with selection of proper tools for rough cutting process. 822-831 - Moshe Shpitalni, Yoram Koren, C. C. Lo:
Realtime curve interpolators. 832-838 - John G. Griffiths:
Toolpath based on Hilbert's curve. 839-844 - Millan K. Yeung, Desmond J. Walton:
Curve fitting with arc splines for NC toolpath generation. 845-849 - Dimitris Kiritsis:
High precision interpolation algorithm for 3D parametric curve generation. 850-856
Volume 26, Number 12, December 1994
- Bülent Özgüç:
Special issue: Advances in animation, rendering and visualization. 859 - Xinmin Zhao, Norman I. Badler:
Interactive body awareness. 861-867 - Ugur Güdükbay, Bülent Özgüç:
Animation of deformable models. 868-875 - Kadi Bouatouch, Thierry Priol:
Data management scheme for parallel radiosity. 876-882 - Cevdet Aykanat, Veysi Isler
Efficient parallel spatial subdivision algorithm for object-based parallel ray tracing. 883-890 - Pascal Guitton, Christophe Schlick:
RRIFF: a proposal for the interchange of realistic scene descriptions. 891-898 - Hendrik A. Goosen, Anna R. Karlin, David R. Cheriton, Dieter Polzin:
Chiron parallel program performance visualization system. 899-906 - Rosa Maria Spitaleri:
Visual numerical environment: reference models, methods and tools. 907-916 - Derek J. Paddon, Alan Chalmers:
Parallel processing of the radiosity method. 917-927 - Scott Whitman:
Survey of parallel approaches to scientific visualization. 928-935
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-11-15 19:42 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: