default search action
ISPE CE 2011: Boston, MA, USA
- Daniel D. Frey, Shuichi Fukuda, Georg Rock:
Improving Complex Systems Today, Proceedings of the 18th ISPE International Conference on Concurrent Engineering, July 4-8, 2011, Boston, MA, USA. Springer 2011, ISBN 978-0-85729-798-3
Systems Engineering
- Ricardo Valerdi, Braulio Fernandes:
Underestimation in the "When It Gets Worse Before it Gets Better" Phenomenon in Process Improvement. 3-10 - Eric Simmon, Sam Dana, Arthur Griesser:
Automation Tools Supporting the Development of Information Standards for Complex Systems. 11-19 - Dinah Eluze Sales Leite, José Lourenço de Oliveira, Geilson Loureiro:
Use of Structured Total Approach in Developing a System for Emergency Power Generation for Aircraft with Fly by Wire. 21-28 - Luiz Alexandre Hiane da Silva Maciel, Paulo Vinicius Jeronimo, Geilson Loureiro:
System Concurrent Engineering of Space Payload Design Aquarius Instrument. 29-41 - Ariana Cristina Caetano de Souza, Lauro Paulo da Silva Neto
, Leonardo Leite Oliva, Geilson Loureiro:
Systems Concurrent Engineering for the Conception of an Attitude and Orbit Control System. 43-53 - Roberto da Cunha Follador, Andrea de Oliveira Netto Follador, Paloma Ribeiro dos Santos, Geilson Loureiro:
Systems Concurrent Engineering of a Hypersonic Accelerator Vehicle. 55-63 - Otávio Luiz Bogossian, Geilson Loureiro:
Attributes Balance on the Adoption of Platform Based Solutions for Satellites. 65-73 - Giuliani Paulineli Garbi, Geilson Loureiro:
Petri Nets for Systems Concurrent Engineering. 75-82 - Luke Webb, Cees Bil:
Systems Support Engineering: Looking Beyond The Physical. 83-90 - Germán Urrego-Giraldo, Gloria Lucía Giraldo G.:
Domain-Centred Functionalities Discovering for Testing Systems Functionalities. 91-98 - Gloria Lucía Giraldo G., Germán Urrego-Giraldo:
Comparison of Domain-Centered and Context-Centered Systems Functionalities. 99-106 - Amar Abbas, Irfan Anjum Manarvi
Concurrent Engineering Applications and Lessons Learnt in Oil Refinery. 107-114 - Syed Zahid Raza Rizvi, Irfan Anjum Manarvi
Analyzing Influence of Absence of CE on Pakistan's Economy from Perspective of Developed Countries Using it. 115-122
Sustainable Environment
- Amy J. C. Trappey, Gilbert Y. P. Lin, Jerry J. R. Ou, Chih-Tung Hsiao, Kevin W. P. Chen:
Green Transportation Strategies and Impact Evaluation Using System Dynamic Modeling. 125-132 - Charles V. Trappey
System Dynamics Evaluation of Renewable Energy Policies. 133-140 - Kazuki Maeda, Yuki Imanishi, Kenji Tanaka
Initial Sizing Model of PV/battery System with Battery Scheduling Algorithm. 141-148
New ICT for Concurrent Engineering
- Avi Latner, Ricardo Valerdi:
Feature Performance Metrics for Software as a Service Offering. 151-158 - Ariana C. Caetano de Souza, Walter Abrahão dos Santos
Automating Services for Spacecraft Conceptual Design Via an Enterprise Service Bus. 159-166 - Moisés Lima Dutra, Nguyen Minh Tri, Parisa Ghodous
An Approach to Adapt Collaborative Architectures to Cloud Computing. 167-174 - Dirk Achenbach, Matthias Gabel, Matthias Huber:
MimoSecco: A Middleware for Secure Cloud Storage. 175-181 - Kamran Ahmed Malik, Irfan Anjum Manarvi
Implementation of CE in Software Development. 183-190 - Vitaly A. Semenov, Sergei V. Morozov, Oleg A. Tarlapan, Vladislav A. Zolotov:
Concurrent Planning Using Semantics-driven Reconciliation. 191-198 - Lingjun Kong, Wensheng Xu, Nan Li, Jianzhong Cha, Jun Ji:
Research on Service Encapsulation of Engineering Software Based on Jini. 199-206 - Samer Abdul Ghafour, Parisa Ghodous
Ontology Development for the Integration of CAD Models in a Collaborative Environment. 207-214 - Wim J. C. Verhagen
Ontological Modelling of the Aerospace Composite Manufacturing Domain. 215-222
Knowledge Engineering
- Christian Van der Velden, Cees Bil, Xinghuo Yu
A Knowledge-Based Approach to Design Automation of Wire and Pipe Routing through Complex Aerospace Structures. 225-232 - Kenji Tanaka
The Cluster Grouping Approach of NM Forecasting Model for Book Publishing. 233-240 - Osíris Canciglieri Júnior
A Prosthesis Design Based on Genetic Algorithms in the Concurrent Engineering Context. 241-248 - Anderson Luis Szejka
Conceptual Reasoning Model for Supporting Strategic Planning of Dental Implant Surgical Process. 249-256 - Wojciech Palacz, Ewa Grabska
Conceptual Designing Supported by Automated Checking of Design Requirements and Constraints. 257-265 - Maciej Gil, Jerzy Pokojski
Extended KBE in Mechanical Engineering: Discussion of Concepts. 267-274 - Maciej Gil, Jerzy Pokojski
Extended KBE in Mechanical Engineering: Discussion of Solutions. 275-283 - Isaac Sanya, Essam Shehab
Towards a Semantic Knowledge Life Cycle Approach for Aerospace Design Engineering. 285-292 - Teruaki Ito, Masayoshi Taniguchi, Tetsuo Ichikawa:
Regeneration of 3D Profile Line Using a Combination of Photo Images and Target Markers. 293-300 - Keiichi Watanuki, Lei Hou:
Virtual Reality-Based Lathe Operation Training Based on Brain Activity Assessment Using Functional Near-Infrared Spectroscopy. 301-308
Value Engineering
- Marcel Schroijen, Michel J. L. van Tooren, Mark Voskuijl
Addressing Complexity in Sustainable Aircraft Design. 311-318 - Márcio Silva Alves Branco, Geilson Loureiro, Luís Gonzaga Trabasso
Balancing Value in Complex Systems Development. 319-326 - Malachy Maginness, Essam Shehab
Value Stream Analysis of Manufacturing Engineering New Product Introduction Processes. 327-334
Product and Service Development
- Myongwon Cho, Shinji Ayao, Kenichi Yoshimoto, Hirokazu Noguchi:
Concurrent Product Development: Case Study of LED Linear Tube Lamp. 337-344 - Ricardo Torcato
Concurrent Development of RIM Parts. 345-352 - Joze Duhovnik, Ziga Zadnik:
Preliminary Design within CE Using the MFF. 353-360 - Janaina Mascarenhas Hornos da Costa
Proposal of a NPD Diagnostic Method to Identify Improvement Opportunities. 361-368 - Nils Macke, Stefan Rulhoff, Josip Stjepandic
Reference Planning Processes for Series Production. 369-376 - Kazuo Hiekata, Hiroyuki Yamato, Masakazu Enomoto, Shogo Kimura:
Accuracy Evaluation System for Shipbuilding Blocks Using Design Data and Point Cloud Data. 377-384 - Masato Inoue, Reona Mogi, Yoon-Eui Nahm, Haruo Ishikawa:
Design Support for "Suriawase": Japanese Way for Negotiation among Several Teams. 385-392 - James Eoin Ryan, Michael Philipp Reik:
Management Teamwork: Influence of Management vs. the Influence of Tools in Product Development Change. 393-400 - Essam Shehab
Towards a Cost Modelling Framework for Outsourcing ERP Systems. 401-408 - Xianming Cai, Satish Kumar Tyagi, Kai Yang
Activity-Based Costing Model for MGPD. 409-416 - Malachy Maginness, Essam Shehab
Planning Manufacturing in a Concurrent Engineering Environment: A Case Study. 417-424 - Alemu Moges Belay
Concurrent Engineering Yesterday, Today and Tomorrow. 425-432 - Muhammad S. Khan, Ahmed Al-Ashaab
Set-Based Concurrent Engineering process within the LeanPPD environment. 433-440 - Wataru Imamura, Noriataka Eda, Kenji Tanaka
Capacity fade model of Lithium-ion batteries for Practical use. 441-448
Emotional Engineering
- Viviane Gaspar Ribas, Fernando Molinari Reda:
Color and Illumination in the Project of Interior Aircraft. 451-458 - Viviane Gaspar Ribas El Marghani, Natália Sgarbi Salata, Ana Claudia Gabardo:
Kansei Engineering: Methodoly to the Project Oriented for the Costumers. 459-466 - Hideyoshi Yanagisawa
Effect of Tonal Harmonic Feature in Product Noise on Emotional Quality. 469-476 - Shuichi Fukuda:
Pragmatic Concurrent Engineering: Emotion, Experience and Engineering. 477-484
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-12-19 22:17 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: