default search action
ICSRS 2019: Rome, Italy
- 4th International Conference on System Reliability and Safety, ICSRS 2019, Rome, Italy, November 20-22, 2019. IEEE 2019, ISBN 978-1-7281-4781-9
- Michael Fischinger, Norbert Egger, Christoph Binder, Christian Neureiter:
Towards a Model-centric Approach for Developing Dependable Smart Grid Applications. 1-9 - Venu Babu Thati
, Jens Vankeirsbilck
Selective Duplication and Selective Comparison for Data Flow Error Detection. 10-15 - Michael A. Slawinski, Andy Wortman:
Applications of Graph Integration to Function Comparison and Malware Classification. 16-24 - Chao Guo, Shuqiao Zhou, Jianghai Li, Fan Chen, Duo Li, Xiaojin Huang:
A Novel Software Reliability Growth Model of Safety-critical Software Considering Fault Severity Classification. 25-29 - Viktorija Stepanova, Ingars Erins:
Blockchain-Based Model for Software Licensing. 30-34 - Ioannis Filippopoulos
Multi-Sensor Data Fusion for the Vessel Trim Analyzer and Optimization Platform. 35-40 - Maurizio Mongelli, Marco Muselli, Enrico Ferrari
Achieving Zero Collision Probability in Vehicle Platooning under Cyber Attacks via Machine Learning. 41-45 - Antonio Acernese, Carmen Del Vecchio
Condition Based Maintenance for Industrial Labeling Machine. 46-50 - Sebastian T. Glavind
Systems Modeling Using Big Data Analysis Techniques and Evidence. 51-59 - Elsa Nur Fitri Astuti, Ida Wahidah, Fiky Yosep Suratman
Data Reconstruction Accuracy of Compressive Sleeping Scheme with Modified S-MAC for Body Sensor Networks. 60-65 - Peng Sun, Robert E. Kooij, Zhidong He, Piet Van Mieghem:
Quantifying the Robustness of Network Controllability. 66-76 - Monika Ziemska, Leszek Smolarek:
The Time Losses as a Reliability of Transport in the Municipal Network during the Mass Event. 77-80 - Xuewei Feng, Jin Li:
A Reliable Lightweight Communication Method via Chain Verification. 81-85 - Salam Ismail Rasheed Khanji, Farkhund Iqbal, Zakaria Maamar
Boosting IoT Efficiency and Security through Blockchain: Blockchain-based Car Insurance Process - A Case Study. 86-93 - Ashraf Tantawy
A Modified Layer of Protection Analysis for Cyber-Physical Systems Security. 94-101 - Tetsushi Yuge:
Reliability of Systems with Simultaneous and Consecutive Failures. 102-106 - Justyna Tomaszewska
Comparative Analysis of Pseudorange Error of GPS and GLONASS Satellite Systems. 107-110 - Mario Di Mauro
Availability Analysis of IP Multimedia Subsystem in Cloud Environments. 111-115 - Irvin Dongo
Credibility Analysis for Available Information Sources on the Web: A Review and a Contribution. 116-125 - Stefan Kaalen, Mattias Nyberg, Carl Bondesson:
Tool-Supported Dependability Analysis of Semi-Markov Processes with Application to Autonomous Driving. 126-135 - Mario Casillo
Embedded Intrusion Detection System for Detecting Attacks over CAN-BUS. 136-141 - Arcangelo Castiglione
Lightweight Ciphers in Automotive Networks: A Preliminary Approach. 142-147 - Seyed Mojtaba Hoseyni
VoI-Based Optimal Sensors Positioning and the Sub-Modularity Issue. 148-152 - Haili Wu, Lei Guan:
The Research of Traceability Algorithm for Hazardous Gas Leakage Based on the Trajectory of Centroids. 153-160 - Claire-Eleuthèriane Gerrer, Sylvain Girard:
Health Monitoring by Physical Modeling and Statistical Learning. 161-165 - Weiguo Hou, Tingting Yan, Chun Yuan, Dengke Pan:
Leakage Analysis of Copper Pipe for Air Conditioner. 166-170 - Duo Li, Shuqiao Zhou, Chao Guo, Wenbin Wei:
Simulation Study of Reactor Protection System Periodic Test Using Monte Carlo Method. 171-174 - Yue Liu, Ke Bao, Qiufang Wang, Enrico Zio:
Application of FTIR Method to Monitor the Service Condition of Used Diesel Engine Lubricant Oil. 175-180 - Phuc Do
Reliability and Maintenance Cost Forecasting for Systems with Multistate Components Using Artificial Neural Networks. 181-185 - Jinyan Guo, Zhaojun Yang, Chuanhai Chen, Hailong Tian
Optimal Design of Constant-Stress Accelerated Degradation Test for Motorized Spindles. 186-192 - Md. Tanbhir Hoq, Md Zakaria Habib, Ebrahim Shayesteh, Nathaniel Taylor:
Reliability Assessment of Protection Schemes for Series Compensated Transmission Lines. 193-197 - Shengxu Wang, Guofa Li, Haiji Yang, Jialong He:
Research on Extreme Value Distribution of Cutting Force in CNC Lathe Based on Generalized Extreme Value Distribution. 198-202 - Matthew Osborne
UAS Operators Safety and Reliability Survey: Emerging Technologies towards the Certification of Autonomous UAS. 203-212 - Lukas Felsberger, Benjamin Todd, Dieter Kranzlmüller:
Power Converter Maintenance Optimization Using a Model-Based Digital Reliability Twin Paradigm. 213-217 - Minh-Tuan Truong, Phuc Do
Reliability Assessment of Optoelectronic Systems with Stochastic Interactions under Accelerated Degradation Testing. 218-223 - Mohammad Ali Nabizadeh, Seyed Mohammad Esmaeil Jalali, Abbas Soltani, Amir Khademian, Javad Barabady:
Reliability and Maintainability Analysis of Material Handling Machinery in Golegohar Mine No. 1. 224-229 - Pidong Wang, Lefei Li, Guanghao Li, Hongyi Li, Zongren Wang:
Automated Reliability Assessment of On-orbit Satellite Battery Pack Based on UML. 230-235 - Soheila Sheikh Bahaei
Effect of Augmented Reality on Faults Leading to Human Failures in Socio-technical Systems*. 236-245 - Stephan Baumgart, Joakim Fröberg, Sasikumar Punnekkat:
A State-based Extension to STPA for Safety-Critical System-of-Systems. 246-254 - Zihao Liu
A Collision Avoidance Manoeuvre and Ship Domain Based Model for Identifying Collision Risk Index between Ships. 255-261 - Wael A. Althobaiti, Saleh A. Aloraini:
Toward Optimum Resiliency: Practical Alignment of BCM and ERM Processes. 262-266 - Clemens Gutschi
A Conceptual Modeling Framework for Evaluating the Performance of Predictive Maintenance for Modern, Real-World Production Systems using Potentials and Risks of Industry 4.0. 267-274 - Soheila Sheikh Bahaei
Extending SafeConcert for Modelling Augmented Reality-equipped Socio-technical Systems*. 275-282 - Fulvio Enzo Ramundo, Lorenzo Fedele
Proposal of a Systematic Approach to Risk Assessment and Management in Space Station. 283-289 - Behnaz Hosseinnia, Nima Khakzad, Riccardo Patriarca, Nicola Paltrinieri
Modeling Risk Influencing Factors of Hydrocarbon Release Accidents in Maintenance Operations using FRAM. 290-294 - Hamid Jahanian
Failure Mode Reasoning. 295-303 - Matteo D. L. Dalla Vedova
Fault Detection and Identification Method Based on Genetic Algorithms to Monitor Degradation of Electrohydraulic Servomechanisms. 304-311 - Haokun Lei, Jian Liu, Chun Xian:
Application of Distributed Machine Learning Model in Fault Diagnosis of Air Preheater. 312-317 - Qianjun Liu, Guijun Ma, Cheng Cheng:
Generative Adversarial Network Based Multi-class Imbalanced Fault Diagnosis of Rolling Bearing. 318-324 - Peng Tao, Jian Liu, Tianxi Liang:
Research on Fault Diagnosis Method of Axial Flow Induced Draft Fan of Power Plant Based on Machine Learning. 325-330 - Zoran Lajic, Alexandros Senteris
Transformation of Vessel Performance System into Fault-tolerant Syste - Example of Fault Detection on Speed Log. 331-338 - Martin Skriver
Adaptive Extended Kalman Filter for Actuator Fault Diagnosis. 339-344 - Mehdi Saman Azari, Francesco Flammini
Data-Driven Fault Diagnosis of Once-through Benson Boilers. 345-354 - Xinggao Zhu, Shijin Shi, Hailong Cheng, Baidong Jin:
Research on Accelerated Life Test Method of Electronic Products Base on Multidimensional Stress Coupling. 355-358 - Jun Ying, Zhaojun Yang, Chuanhai Chen, Xiaoxu Li, Hailong Tian
Stress Intensity Factors for Thick-walled Cylinder under Interference Fit. 359-363 - Shenggang Xu, Jin Li, Jiale Lu, Rushan Cai:
Research on Reliability and Working Life Assessment Method of Mechanical and Electrical Products in Weapon Equipment. 364-368 - Alberto Bocca:
A Method to Empirically Set the Coefficients of an Analytical Model of Battery Aging. 369-373 - Ran Ding, Qiang Li, Wenjing Wang, Hua Zou, Xincan Jin:
A Method for Conservative Damage Estimation Based on Linear Damage Accumulation. 374-379 - Xiaobing Li, Guangze Pan, Jun Ying, Xiaocui Zhu:
A Model Optimization Method for Accelerated Degradation Test Data. 380-384 - Giulio Di Gravio, Luca Venanzi, Francesco Costantino, Riccardo Patriarca, Massimo Tronci:
About Spare Parts Cannibalization for Rotable Items a Preliminary Approach for Inventory Control. 385-389 - Wei Wang
Operation Assessment of Service Water Systems under Periodic Inspection and Maintenance. 390-393 - Faiz Ul Muram, Muhammad Atif Javed, Sasikumar Punnekkat:
System of Systems Hazard Analysis Using HAZOP and FTA for Advanced Quarry Production. 394-401 - Xueyi Li, Jinjun Zhang, Huai Su, Enrico Zio:
Resilience Assessment of China's Natural Gas Supply System Based on Ecological Network Analysis. 402-406 - Chuanhai Chen, Junqi Long, Hailong Tian
Reliability Analysis of the Light Truck Frame Based on Statics Structure and Response Surface Methodology. 407-413 - Bahri Uzunoglu:
Implicit 4DVar Particle Filter State Estimation of Dynamic Power Systems: Preliminary Results. 414-420 - Mehmet Baran Ulak, Anil Yazici
Power Resilience Assessment from Physical and Socio-Demographic Perspectives. 421-428 - Ali Erduman
Optimized Mesoscale Wind Farm Placement Constrained by Power System Including Earthquake Damage Costs. 429-435 - Shijia Du, Zhiguo Zeng, Yi-Ping Fang, Qingqing Zhai
Resilience Analysis of Multistate Systems Based on Markov Reward Processes. 436-440 - Xiaobing Li, Mingxi Cai, Jingyan Guo, Xiaocui Zhu:
Natural Reliability Growth Trend Test Application on Electromechanical System. 441-445 - Jamie Fox, Giray Ökten, Bahri Uzunoglu:
Global Sensitivity Analysis for Power Systems via Quasi-Monte Carlo Methods. 446-451 - Maurizio Mongelli, Marco Muselli, Andrea Scorzoni, Enrico Ferrari
Accellerating PRISM Validation of Vehicle Platooning Through Machine Learning. 452-456 - Marina Velikova, Carmen Bratosin, Alexander Ypma, Vera Lemmen, Robert Jan van Wijk:
Assisted Diagnostics Methodology for Complex High-Tech Applications. 457-463 - Adrien Touboul, Romain Barbedienne, Jean-Michel Edaliti:
Models of Margin: From the Mathematical Formulation to an Operational Implementation. 464-473 - Emmanuel Fragnière
On the Benefit of Mixing Varied Professional Skills to Better Handle Improvisation Phases in Crisis Management: A Qualitative Survey Conducted in Geneva and Valais, Switzerland. 474-478 - Jiangfeng Ding, Xiaorui Wang
Collision Response of a Cutting Energy Absorber and Its Application to Crashworthiness of Metro Trains. 479-483 - Tobias Schmid, Stefanie Schraufstetter, Stefan Wagner
A Safety Argumentation for Fail-Operational Automotive Systems in Compliance with ISO 26262. 484-493 - Sebastian Vander Maelen, Matthias Büker, Birte Kramer
An Approach for Safety Assessment of Highly Automated Systems Applied to a Maritime Traffic Alert and Collision Avoidance System. 494-503 - Giulio Di Gravio
Actionable Safety Analyses in Socio-technical Systems with myFRAM. 504-508 - Anselm Klose
Safety-Lifecycle of Modular Process Plants - Information Model and Workflow. 509-517 - Mariana Cadena-Romero, Jorge Octavio Ocharán-Hernández
Tool-Supported Requirement Engineering: A Categorization of the State of the Art and Research Trends. 514-523 - Ming-Xi Cai, Xiao-Bing Li, Wen-An Mo, Sheng-Gang Xu, Jian-Feng Yang:
Environmental Safety Evaluation Technology of Unmanned Aerial Vehicles Based on Quality Function Deployment. 518-522 - Mizuki Soeda, Masahiro Hayashi:
Extended Matrix Approach for Differential Calculus and Its Application to Reliability Engineering. 533-538 - Zhibao Mian, Yaqing Gao, Xiaodong Shi, Cairong Tang:
Semantic Mapping for Model Transformation Between AADL2 and HiP-HOPS. 539-543 - Esra Çakir
Interval Type-2 Fuzzy Reliability Modeling for Recycling Facility. 544-548 - Zhibao Mian, Cairong Tang, Yaqing Gao, Shuli Jia, Xiaodong Shi, Junjie Chen:
A Cost Modeling Method Based on AADL2. 549-553 - Bruno Monsuez, Michel Nakhlé:
Applying SafeComp, a Formal Integrated System Modeling Framework, to the Design of a Steam Generator Controller. 554-560 - Mateusz Iwo Dubaniowski
Supply-at-Risk: Resilience Metric for Infrastructure Systems: Framework for assessing and comparing resilience of infrastructure systems in urban areas. 561-565 - Bo Sun, Zhaojun Yang, Chuanhai Chen, Hailong Tian
Compiling Compression Load Spectrum of Servo Turret Based on Finite Element and Information Entropy Method. 566-571 - Xiaolei Li, Mingjun Chen, Chuanhai Chen, Tongtong Jin, Dong Zhu
Reliability Modelling Method of Computerized Numerical Control Machine Tools Based on the Improved Posterior Distribution. 572-577 - Jiangfeng Ding, Qiang Gao:
Rapid Modeling and Simulation for the Stiffness and Modal Analysis of the Stainless Steel Subway Carbody. 578-583 - Chuanhai Chen, Junqi Long, Hailong Tian
Reliability Modeling for Hydraulic Components of Heavy Duty Machine Tools Based on Degradation Path for Oil Contamination. 584-589
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-12-15 01:31 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: