[go: up one dir, main page]

fivdi


Brian Cooke

  • LED control on Linux boards

    published version 1.0.1, a year ago
  • Break on Through - ADC, GPIO, PWM, UARTs, and more on the BeagleBone Black.

    published version 0.12.1, 9 years ago
  • ADC, GPIO, PWM, UARTs, and more on the BeagleBone Black.

    published version 1.0.2, 9 years ago
  • Hitachi HD44780 LCD driver

    published version 3.1.1, 4 years ago
  • BeagleBone Black IO Plugin for Johnny-Five

    published version 4.1.0, 5 years ago
  • I2C serial bus access with Node.js

    published version 5.2.3, a year ago
  • A low-level Node.js binding for the Linux epoll API

    published version 4.0.2, a year ago
  • GPIO access and interrupt detection with Node.js

    published version 6.0.3, 4 years ago
  • Configure I2C bus 6 on the Intel Edison Arduino base board

    published version 0.1.2, 9 years ago
  • Hardware momentary push-buttons the Linux way

    published version 1.0.0, 7 years ago
  • Fast GPIO, PWM, servo control, state change notification, and interrupt handling on the Raspberry Pi

    published version 3.3.1, 4 years ago
  • SPI serial bus access with Node.js

    published version 3.1.2, 3 years ago
  • MCP3002/4/8, MCP3202/4/8 and MCP3304 SPI analog to digital conversion

    published version 3.2.0, 3 years ago
  • Extensible Linux IO Plugin for Johnny-Five

    published version 1.1.1, 4 years ago
  • Raspberry Pi IO Plugin for Johnny-Five

    published version 1.1.1, 4 years ago
  • published version 0.0.0, 7 years ago
  • published version 0.0.0, 7 years ago
  • MCP9808 I2C temperature sensor

    published version 1.1.1, 4 years ago
  • HTS221 I2C humidity and temperature sensor

    published version 1.1.1, 4 years ago
  • published version 0.0.0, 6 years ago
  • I2C Driver for the BME280 humidity, pressure and temperature sensor

    published version 2.1.1, 4 years ago