At 6/14/11 05:07 AM, Addict wrote: You usually get banned if audio is stolen or not that good.

Audio Bans are permanent until removed by a staff member or an audio moderator. Feel free to contact them, a list of the audio mods can be found in the FAQ section.

Holy shit that's a long list. Do I really need to PM all of them? Why is there no forum for this sort of thing?

At 6/14/11 05:07 AM, Addict wrote: You usually get banned if audio is stolen or not that good.

Audio Bans are permanent until removed by a staff member or an audio moderator. Feel free to contact them, a list of the audio mods can be found in the FAQ section.

Ok, thanks. The track I'm submitting is a first time audio submission, I have 2 old flash submissions which aren't stolen and have proper credit given to the music makers just like the audio submissions I'm trying to do. I couldn't have done anything to get banned. I'll pm the mods thanks again.

I've never submitted a single audio work and somehow I'm banned from submitting any. Bug? LulzSec Team 6? Beats me. Please fix?

At 7/26/08 06:44 AM, citricsquid wrote: When I set it up it was done via command line, I don't *think* you can do it without root access. You need to edit the config file that points domains to where, you have to add "*.domain.com" etc.

http://www.wiredstudios.com/php-programm ing/setting-up-wildcard-dns-for-subdomai ns-on-cpanel.html

That's a good guide :)

That IS a good guide, thank you very much :) I'm getting everything set up right now :D

Anybody know of any good guides for this? I'm setting up wordpress so that I can do user.domain.com to go to their blog, just like how it is on newgrounds and a few other sites. I'm fairly certain that I would need root access to the server for this but I'm just not sure how to set it up.

At 6/29/08 09:41 AM, RyanTime2 wrote:

At 6/29/08 09:39 AM, Achilleuss wrote:

At 6/29/08 09:33 AM, RyanTime2 wrote: That would NOT be vector, but use of gradients, sir.

No it would be vector drawn, because it needs to be resizable so I can reuse it :P Something0 not vector drawn would not scale accurately and would easily pixelate.

Then you will need an fla, if you plan on it being resizable.

A fla would be fine, so would an illustrator format. In fact I would prefer one of the two as opposed to a jpg or gif, because I can modify the source for each image, which would achieve the best results.

At 6/29/08 09:33 AM, RyanTime2 wrote: That would NOT be vector, but use of gradients, sir.

No it would be vector drawn, because it needs to be resizable so I can reuse it :P Something0 not vector drawn would not scale accurately and would easily pixelate.

Glossy as in glassy looking, like the windows startbar. Just shiny black like a brand new 2003 TransAm.

Hey newgrounders, it's been a long time since I've come here and posted lol. I was wondering if anybody here might be able to make a vector image for me? I've always been terrible at making that gloss effect. All I really need is a rectangle/square maybe like 200x200 or so for a web site. I've been meaning to update it for a LONG time now and haven't been able to simply because I'm missing a few images :(

haha I just figured it out and it was so much more simple then what I was doing. xD

Ah damn, there's no edit button still. I forgot to actually say what my problem was rofl. Problem is that this script is not posting any vars to the php file. If the php file was accessed at all, it would still email me, however it's not getting that far.

I'm trying to use some actionscript to send a form to a PHP processor(which will do the actual mailing). Any and all attempts I've made at this have failed miserably. Here's the actionscript I'm using right now:

stop();

var fullName:TextField;
var emailAddress:TextField;
var fullAddress:TextField;
var city:TextField;
var usstate:TextField;
var zip:TextField;
var phoneNumber:TextField;
var age:TextField;
var whatOwned:TextField;
var howHear:TextField;
var howSite:TextField;

fullName.restrict = "A-Za-zÁáÉéêíÍãõç ";
fullName.maxChars = 40;

fullAddress.restrict = "0-9A-Za-zÁáÉéêíÍãõç!?.+\- ";
fullAddress.maxChars = 90;

zip.restrict = "0-9A-Za-zÁáÉéêíÍãõç!?.+\- ";
zip.maxChars = 10;

phoneNumber.restrict = "0-9A-Za-zÁáÉéêíÍãõç!?.+\- ";
phoneNumber.maxChars = 10;

emailAddress.restrict = "0-9A-Za-zÁáÉéêíÍãõç!?.+\- ";
emailAddress.maxChars = 50;

function sendEmail(fullName, emailAddress, zip, phoneNumber, fullAddress, city, usstate, age, whatOwned, howHear, howSite)
{
var myData:LoadVars = new LoadVars();
myData.fullName = fullName.text;
myData.fullAddress = fullAddress.text;
myData.zip = zip.text;
myData.phoneNumber = phoneNumber.text;
myData.emailAddress = emailAddress.text;
myData.city = city.text;
myData.usstate = usstate.text;
myData.age = age.text;
myData.whatOwned = whatOwned.text;
myData.howHear = howHear.text;
myData.howSite = howSite.text;
}

this.submitButton.
{
if (fullName.text == "" || fullAddress.text == "" || zip.text == "" || phoneNumber.text == "" || city.text == "" || usstate.text == "" || age.text == "" || emailAddress.text == "")
{
gotoAndStop(3);
}

else

{
sendEmail();
gotoAndStop(2);
}

myData.send("http://www.mysite.com/temp/maillist.php",myData,"POST");
};

I'm a complete noob when it comes to ActionScript, hell I'm not even sure if var variable:TextField; is even doing what I'm assuming it's doing. I've got some experience with Java so it's slightly familiar but not enough :(

Any help appreciated :D

Yeah that's what I saw too :( I googled a few different things and it's not possible lol. I even found this which was pretty funny. Some guy told this noob to draw on his touchpad with a sharpie and that you had to draw pen15 in order for it to work.

He actually tried it.

xD

Is it possible to get some drivers or something that will make this touchpad on my laptop similar to a wacom pad? I'm dirt poor and can't afford a wacom pad :(

*bump*

I'd hate for all that typing to go to waste :( What does everybody else think?

At 8/29/07 12:07 AM, kidray76 wrote: This is something you would pm or email an admin about, specifically Tom since your wanting to actually code the site.

Don't really know the protocol for this, since Tom has a standard for who does what. Best bet is do like I said, and have a "impressive" resume to back this up. Pretty sure he's not gonna take you seriously if you don't have any references youreslf.

While I'm on the subject of learning tons of things at once, do you have any suggestions for what I should master first? I'm not a total noob, but it sure would be nice to not have to go to google as much. As far as design of a site is concerned, I can't even figure out how to make a rounded edge with a gradient following the curvature(an elbow joint I suppose, for a site template).

At 8/29/07 12:07 AM, kidray76 wrote: This is something you would pm or email an admin about, specifically Tom since your wanting to actually code the site.

Don't really know the protocol for this, since Tom has a standard for who does what. Best bet is do like I said, and have a "impressive" resume to back this up. Pretty sure he's not gonna take you seriously if you don't have any references youreslf.

I'm no master at development or design so honestly I probably wouldn't do Newgrounds too much good, I was actually just kidding lol. I'm learning so many different things all at once(Java at the college, cans-o-php, flash, illustrator, etc. etc.) it seems as if it'll take forever to be able to code something as nice and beautiful as the newgrounds site is. But then again, I'm focusing on EVERYthing. If I had somebody that would take a share of my workload from these sites I have to do, I could focus on fewer things at once. I know a thing or two about a thing or two(maybe even three!) but I'm afraid I'd have to learn a LOT more before I apply to newgrounds lol. It WOULD be nice to work for newgrounds though :D

If newgrounds ever has a need for somebody to document anything, I'm on the documentation team at Simplemachines. I have very good English and grammar skills.

But seriously though, does anybody think that these dynamic images would help server load any? Now that I'm looking at some of the code that would be required to do it I'm thinking it would just make the load worse :(

I took a glance at some of the css files used for the main page(shoot me, I couldn't help a peek at this nice looking site haha) and I was wondering if it would decrease the server load to use dynamic images instead of a lot of CSS to get the effects used for the movie/audio links? They are pretty simple to make, and you'd only need two image files to do it for the rollover effects. This is what I'll be doing for one of my sites. It's not anywhere near as high traffic as newgrounds and it's not a flash portal either, I just have the flash there for some entertainment, but well you know what I mean lol.

Just a suggestion, if it actually works out that way and you eventually it you gotta let me submit a resume :P

About 800 dollars. Still haven't paid the damn thing off, I've got bigger bills(like rent) to worry about lol

That's the specific one I was thinking actually, I just couldn't remember it /doh It's been a long time since I've had to use it.

I do love the forum layout and the rest of the site too, major props. There's just a few things that bug me. A few features that I've grown to be quite used to that seem to be missing(or I can't find them) here. I guess the best way to go about doing it would be to just list them.

preview post
edit post
topic subscription(notifications)
quick reply
smileys :D
<img> or [img]

You can use date() and specify how you want it to display quite easily. If you have to filter the word out, you can use the strip_tags() and related functions.

More info on strip_tags() here

I got my license suspended for going 115 in a 70. :(

*bump*

Hello, I've been pretty interested in Flash the past few weeks. I've made a few splash screens and what not, but I've got a project I'd like to make for newgrounds called Stupid Fucks. Basically it's like something me and my friends used to make when we were kids, we had a bunch of stick figures doing stupid shit like armies of them skydiving in to shark infested water or whatever. Pretty funny stuff, you'd have to see it to appreciate the humor though lol.

So anyway, I've got the basics of the background finished up on it(moving water, ramps, sky) and as with every flash I've made so far I'm getting to the point where I worry about how I'm going to organize it and put everything together.

I'm going to go ahead and trust that nobody here is gonna steal my ideas because they'd end up like this face right here [img]http://img.ngfiles.com/emoticons/em ote-13.gif[/img] lol. But anyway I've uploaded a .fla of what I got so far, I'm using Flash CS3. I uploaded it to http://www.insanereality.com/stupidfucks 1.fla

Like I said before, all I got so far is the background stuff. I'd really appreciate it if somebody could look at it and give me any suggestions or tips they think of :) I have 2 stick figure symbols on there too, though I'll probably redo them soon. They don't look quite like how I was wanting.

I've been looking at a ton of the movies here at newgrounds, and all the content here is amazing. I see all sorts of flash movies uploaded daily that would take me months to make at my current skill level. Flash seems to be one of the best ways to express an artist's emotions, and I have so many ideas I want to put out here on Newgrounds :D I've had a lot of good dreams lately(mainly because I've been listening to soundtracks while I sleep now instead of rap) that I want to put in to some flashes eventually.

I don't mean to turn this request in to an introduction, I'm sure there's another forum for that, but any help is appreciated <3