[go: up one dir, main page]
DSTU2
<

This page is part of the FHIR Specification (v1.0.2: DSTU 2). The current version which supercedes this version is 5.0.0. For a full list of available versions, see the Directory of published versions . Page versions: R5 R4B R4 R3 R2

ul class="nav nav-tabs">
  • Data Types
  • Examples
  • Detailed Descriptions
  • Mappings

    • 1.19.3 Data Type Mappings

    FHIR Infrastructure Work GroupMaturity Level: N/ABallot Status: DSTU 2

    This page provides mappings for the data types. There are mappings to HL7 v2 , HL7 v3 , and (where appropriate) vCard.

    Table of Contents

    Primitive Types
    ElementinstanttimedatedateTimedecimalbooleanintegerstringuribase64BinarycodeidoidunsignedIntpositiveIntmarkdown    		 Complex Types
    ElementIdentifierHumanNameAddressContactPointTimingQuantitySimpleQuantityAttachmentRangePeriodRatioCodeableConceptCodingSampledDataAgeDistanceDurationCountMoneyAnnotationSignature
    1.19.3.1 Primitive Types

    See also Base Definition, Examples and Detailed Descriptions.

    Data TypeV2RIM
    base64Binary~EDBIN
    booleann/aBL
    dateDTTS
    dateTimeDTMTS
    decimal~NMREAL
    instantDTMTS
    integer~NM/~SIINT
    stringSTST
    timeTMn/a
    urin/aURL
    1.19.3.2 Attachment

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.3 Mappings for HL7 v2 (http://hl7.org/v2)

    AttachmentED/RP
        contentTypeED.2+ED.3/RP.2+RP.3. Note conversion may be needed if old style values are being used
        language
        dataED.5
        urlRP.1+RP.2 - if they refer to a URL (see v2.6)
        size
        hash
        title
        creation

    1.19.3.4 Mappings for RIM (http://hl7.org/v3)

    AttachmentED
        contentType./mediaType, ./charset
        language./language
        data./data
        url./reference/literal
        sizeN/A (needs data type R3 proposal)
        hash.integrityCheck[parent::ED/integrityCheckAlgorithm="SHA-1"]
        title./title/data
        creationN/A (needs data type R3 proposal)
    1.19.3.5 Identifier

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.6 Mappings for HL7 v2 (http://hl7.org/v2)

    IdentifierCX / EI (occasionally, more often EI maps to a resource id or a URL)
        useN/A
        typeCX.5
        systemCX.4 / EI-2-4
        valueCX.1 / EI.1
        periodCX.7 + CX.8
        assignerCX.4 / (CX.4,CX.9,CX.10)

    1.19.3.7 Mappings for RIM (http://hl7.org/v3)

    IdentifierII - see see identifier pattern at http://wiki.hl7.org/index.php?title=Common_Design_Patterns#Identifier_Pattern for relevant discussion. The Identifier class is a little looser than the v3 type II because it allows URIs as well as registered OIDs or GUIDs. Also maps to Role[classCode=IDENT]
        useRole.code or implied by context
        typeRole.code or implied by context
        systemII.root or Role.id.root
        valueII.extension or II.root if system indicates OID or GUID (Or Role.id.extension or root)
        periodRole.effectiveTime or implied by context
        assignerII.assigningAuthorityName but note that this is an improper use by the definition of the field. Also Role.scoper

    1.19.3.8 Mappings for ServD (http://www.omg.org/spec/ServD/1.0/)

    IdentifierIdentifier
        use
        type
        system./IdentifierType
        value./Value
        period./StartDate and ./EndDate
        assigner./IdentifierIssuingAuthority
    1.19.3.9 Coding

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.10 Mappings for Ontological RIM Mapping (http://hl7.org/orim)

    Codingfhir:Coding rdfs:subClassOf dt:CDCoding
        systemfhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem
        versionfhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion
        codefhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code
        displayfhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName
        userSelectedfhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\#true a [ fhir:source "true"; fhir:target dt:CDCoding.codingRationale\#O ]

    1.19.3.11 Mappings for HL7 v2 (http://hl7.org/v2)

    CodingCE/CNE/CWE subset one of the sets of component 1-3 or 4-6
        systemC*E.3
        versionC*E.7
        codeC*E.1
        displayC*E.2 - but note this is not well followed
        userSelectedSometimes implied by being first

    1.19.3.12 Mappings for RIM (http://hl7.org/v3)

    CodingCV
        system./codeSystem
        version./codeSystemVersion
        code./code
        displayCV.displayName
        userSelectedCD.codingRationale
    1.19.3.13 CodeableConcept

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.14 Mappings for Ontological RIM Mapping (http://hl7.org/orim)

    CodeableConceptfhir:CodeableConcept rdfs:subClassOf dt:CD
        codingfhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding
        textfhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText

    1.19.3.15 Mappings for HL7 v2 (http://hl7.org/v2)

    CodeableConceptCE/CNE/CWE
        codingC*E.1-8, C*E.10-22
        textC*E.9. But note many systems use C*E.2 for this

    1.19.3.16 Mappings for RIM (http://hl7.org/v3)

    CodeableConceptCD
        codingunion(., ./translation)
        text./originalText[mediaType/code="text/plain"]/data
    1.19.3.17 Quantity

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.18 Mappings for HL7 v2 (http://hl7.org/v2)

    QuantitySN (see also Range) or CQ
        valueSN.2 / CQ - N/A
        comparatorSN.1 / CQ.1
        unit(see OBX.6 etc.) / CQ.2
        system(see OBX.6 etc.) / CQ.2
        code(see OBX.6 etc.) / CQ.2

    1.19.3.19 Mappings for RIM (http://hl7.org/v3)

    QuantityPQ, IVL<PQ>, MO, CO, depending on the values
        valuePQ.value, CO.value, MO.value, IVL.high or IVL.low depending on the value
        comparatorIVL properties
        unitPQ.unit
        systemCO.codeSystem, PQ.translation.codeSystem
        codePQ.code, MO.currency, PQ.translation.code
    1.19.3.20 Range

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.21 Mappings for HL7 v2 (http://hl7.org/v2)

    RangeNR and also possibly SN (but see also quantity)
        lowNR.1
        highNR.2

    1.19.3.22 Mappings for RIM (http://hl7.org/v3)

    RangeIVL<QTY[not(type="TS")]> [lowClosed="true" and highClosed="true"]or URG<QTY[not(type="TS")]>
        low./low
        high./high
    1.19.3.23 Ratio

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.24 Mappings for HL7 v2 (http://hl7.org/v2)

    RatioN/A
        numerator
        denominator

    1.19.3.25 Mappings for RIM (http://hl7.org/v3)

    RatioRTO
        numerator.numerator
        denominator.denominator
    1.19.3.26 Period

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.27 Mappings for HL7 v2 (http://hl7.org/v2)

    PeriodDR
        startDR.1
        endDR.2

    1.19.3.28 Mappings for RIM (http://hl7.org/v3)

    PeriodIVL<TS>[lowClosed="true" and highClosed="true"] or URG<TS>[lowClosed="true" and highClosed="true"]
        start./low
        end./high
    1.19.3.29 SampledData

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.30 Mappings for HL7 v2 (http://hl7.org/v2)

    SampledDataN/A (but see section 7.14 in v2.7)
        origin
        period
        factor
        lowerLimit
        upperLimit
        dimensions
        data

    1.19.3.31 Mappings for RIM (http://hl7.org/v3)

    SampledDataSLIST + GLIST
        originSLIST.origin
        periodGLIST.increment
        factorSLIST.factor
        lowerLimitN/A (use SLIST.digits.nullFlavor)
        upperLimitN/A (use SLIST.digits.nullFlavor)
        dimensionsN/A (fixed to 1)
        dataSLIST.digits
    1.19.3.32 HumanName

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.33 Mappings for HL7 v2 (http://hl7.org/v2)

    HumanNameXPN
        useXPN.7, but often indicated by which field contains the name
        textimplied by XPN.11
        familyXPN.1
        givenXPN.2 + XPN.3
        prefixXPN.5
        suffixXPN/4
        periodXPN.13 + XPN.14

    1.19.3.34 Mappings for RIM (http://hl7.org/v3)

    HumanNameEN (actually, PN)
        useunique(./use)
        text./formatted
        family./part[partType = FAM]
        given./part[partType = GIV]
        prefix./part[partType = PFX]
        suffix./part[partType = SFX]
        period./usablePeriod[type="IVL<TS>"]

    1.19.3.35 Mappings for ServD (http://www.omg.org/spec/ServD/1.0/)

    HumanNameProviderName
        use./NamePurpose
        text
        family./FamilyName
        given./GivenNames
        prefix./TitleCode
        suffix
        period./StartDate and ./EndDate

    vCard Mappings

    • HumanName.text = vCard "FN" field
    • HumanName.use = use of the vCard "TYPE" parameter
    • HumanName.family, .given, .prefix, .suffix = parts of vCard "N" field. Note that there is no FHIR equivalent for the poorly defined "additional" name field. In FHIR, given names go in "middle" names
    • The vCard nickname corresponds to a name with the use "nickname"
    1.19.3.36 Address

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.37 Mappings for HL7 v2 (http://hl7.org/v2)

    AddressXAD
        useXAD.7
        typeXAD.18
        textXAD.1 + XAD.2 + XAD.3 + XAD.4 + XAD.5 + XAD.6
        lineXAD.1 + XAD.2 (note: XAD.1 and XAD.2 have different meanings for a company address than for a person address)
        cityXAD.3
        districtXAD.9
        stateXAD.4
        postalCodeXAD.5
        countryXAD.6
        periodXAD.12 / XAD.13 + XAD.14

    1.19.3.38 Mappings for RIM (http://hl7.org/v3)

    AddressAD
        useunique(./use)
        typeunique(./use)
        text./formatted
        lineAD.part[parttype = AL]
        cityAD.part[parttype = CTY]
        districtAD.part[parttype = CNT | CPA]
        stateAD.part[parttype = STA]
        postalCodeAD.part[parttype = ZIP]
        countryAD.part[parttype = CNT]
        period./usablePeriod[type="IVL<TS>"]

    1.19.3.39 Mappings for vCard (http://w3.org/vcard)

    Address
        use
        typeaddress type parameter
        textaddress label parameter
        linestreet
        citylocality
        district
        stateregion
        postalCodecode
        countrycountry
        period

    1.19.3.40 Mappings for ServD (http://www.omg.org/spec/ServD/1.0/)

    AddressAddress
        use./AddressPurpose
        type
        text
        line./StreetAddress (newline delimitted)
        city./Jurisdiction
        district
        state./Region
        postalCode./PostalIdentificationCode
        country./Country
        period./StartDate and ./EndDate
    1.19.3.41 ContactPoint

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.42 Mappings for HL7 v2 (http://hl7.org/v2)

    ContactPointXTN
        systemXTN.3
        valueXTN.1 (or XTN.12)
        useXTN.2 - but often indicated by field
        rankn/a
        periodN/A

    1.19.3.43 Mappings for RIM (http://hl7.org/v3)

    ContactPointTEL
        system./scheme
        value./url
        useunique(./use)
        rankn/a
        period./useablePeriod[type="IVL<TS>"]

    1.19.3.44 Mappings for ServD (http://www.omg.org/spec/ServD/1.0/)

    ContactPointContactPoint
        system./ContactPointType
        value./Value
        use./ContactPointPurpose
        rank
        period./StartDate and ./EndDate
    1.19.3.45 Timing

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.46 Mappings for HL7 v2 (http://hl7.org/v2)

    TimingN/A
        event
        repeat
            bounds[x]
            count
            duration
            durationMax
            durationUnits
            frequency
            frequencyMax
            period
            periodMax
            periodUnits
            when
        code

    1.19.3.47 Mappings for RIM (http://hl7.org/v3)

    TimingQSET<TS> (GTS)
        eventQLIST<TS>
        repeatImplies PIVL or EIVL
            bounds[x]IVL(TS) used in a QSI
            countPIVL.count
            durationPIVL.phase / EIVL.offset
            durationMaxPIVL.phase / EIVL.offset
            durationUnitsPIVL.phase.unit
            frequencyPIVL.phase / EIVL.offset
            frequencyMaxPIVL.phase
            periodPIVL.phase
            periodMaxPIVL.phase
            periodUnitsPIVL.phase.unit
            whenEIVL.event
        codeQSC.code
    1.19.3.48 Signature

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.49 Annotation

    See also Base Definition, Examples and Detailed Descriptions.

    1.19.3.50 Mappings for HL7 v2 (http://hl7.org/v2)

    AnnotationN/A
        author[x]N/A
        timeN/A
        textN/A

    1.19.3.51 Mappings for RIM (http://hl7.org/v3)

    AnnotationAct
        author[x]Act.participant[typeCode=AUT].role
        timeAct.effectiveTime
        textAct.text